PM0807W Telemetry Servo
0807W 6.0V 7.4V 8.4V SPEED .12 sec / 60 degrees .11 sec / 60 degrees .08 sec / 60 degrees TORQUE 61 N-cm (86 oz/in) 66 Ncm (93 oz/in) 72 Ncm (101 oz/in)
| 0807W | 6.0V | 7.4V | 8.4V |
| SPEED | .12 sec / 60 degrees | .11 sec / 60 degrees | .08 sec / 60 degrees |
| TORQUE | 61 N-cm (86 oz/in) | 66 Ncm (93 oz/in) | 72 Ncm (101 oz/in) |
FEATURES
MAGNETIC ENCODER CHIPS replace vulnerable potentiometers used in most servos. This digital solution gives PM PULSE servos ultimate precision and ensures reliability in the harshest applications.
ADVANCED 32 BIT PROCESSORS manage a 10kHz internal control loop — 10,000 complete cycles per second! This computing headroom facilitates the following enhanced capabilities.
SELF-PROTECTING firmware prevents servo from overheating when movement is blocked. User may choose servo response (hold, continue, release).
CURRENT CONTROLLED OPERATION ensures optimal torque and greatly extends the service life of servo motor.
HIGH FREQUENCY MOTOR SWITCHING places servo motor operation above the audible range — no more buzzy servos.
TELEMETRY
PM PULSE servos report up to 14 different data points back to the command controller or autopilot unit.
REAL TIME DATA POINTS
GUI PROGRAMMING
USB PROGRAMMABILITY allows users to take full advantage of the PM PULSE feature set. Simply link using a PM USB adapter and the PULSE MANAGER graphic interface to access a huge array of setup and operational parameters.
ELECTRICAL
Operating voltage 4.8-8.4V Position sensor 0.1° magnetic encoder Motor Coreless Travel & Multiple turn 60°+/- Standard.
Up to 3,600° capable. Neutral position Set neutral at any point in the 360° rotation. Does not limit resulting range of motion.
Users may install servos in application and then set neutral position.
Neutral point is durable. Number of turns durable within power cycle only. Motor PWM freq. 40kHz (inaudible) Pulse input compatibility 100Hz with telemetry
300Hz without telemetry
| Operating voltage | 4.8-8.4V |
| Position sensor | 0.1° magnetic encoder |
| Motor | Coreless |
| Travel & Multiple turn | 60°+/- Standard. Up to 3,600° capable. |
| Neutral position | Set neutral at any point in the 360° rotation. Does not limit resulting range of motion. Users may install servos in application and then set neutral position. Neutral point is durable. Number of turns durable within power cycle only. |
| Motor PWM freq. | 40kHz (inaudible) |
| Pulse input compatibility | 100Hz with telemetry 300Hz without telemetry |